Configuration via ors-config.json

WARNING

The ors-config.json is deprecated! Migrate to ors-config.yml.

The "old" configuration method is supported for a while for convenience. The description below is kept as long as openrouteservice still supports configuration via JSON file, but we do not recommend using this configuration method. Please consider migrating your JSON configuration to the new style. Note that currently all settings in a provided JSON configuration file will override any settings in the YAML file.

ors

The top level element.

key	type	description	example value
services	object	an object comprising the services	services
logging	object	the logging properties	logging
system_message	list	List of system message objects	system messages

---

ors.services

key	type	description	example value
ors.services.routing	object	settings for routing and its profiles	routing
ors.services.isochrones	object	settings for isochrones restrictions	isochrones
ors.services.matrix	object	settings for matrix restrictions	matrix
ors.services.snap	object	settings for snap	snap

---

ors.services.routing

key	type	description	example value
enabled	boolean	Enables or disables (true/false) the end-point. Default value is true.	true
mode	string	Can be either "normal" or "preparation". If "preparation" then graphs will be built and the service will be shut down afterwards.	"normal"
description	string		"This is a routing file from openrouteservice"
routing_name	string	Specifies the gpx name tag that is returned in a gpx response	"openrouteservice"
sources	list	the osm file to be used, formats supported are .osm, .osm.gz, .osm.zip and .pbf	["heidelberg.osm.gz"]
init_threads	number	The number of threads used to initialize (build/load) graphs. Higher numbers requires more RAM.	2
attribution	string	Attribution added to the response metadata	"openrouteservice.org, OpenStreetMap contributors"
elevation_preprocessed	boolean	Enables or disables reading ele tags for nodes. Default value is false. If enabled, GH's elevation lookup is prevented and all nodes without ele tag will default to 0. Experimental, for use with the ORS preprocessor	false
profiles	object		profiles

---

ors.services.routing.profiles

key	type	description	example value
active	list	Defines a list of active routing profiles. The element name XXX must correspond to a notation "profile-XXX", which is used in the following sections. Can be one or many of "car", "hgv", "bike-regular", "bike-mountain", "bike-road", "bike-electric", "walking", "hiking" or "wheelchair"	["car", "bike-regular"]
default_params	object	Set parameters that is applied to every profile by default	default_params
profile-XXX	object	Settings that are applied to the specific profile. You may run multiple profiles at once.	profile-XXX

---

ors.services.routing.profiles.default_params

key	type	description	example value
encoder_flags_size	number	The number of bytes used for FlagEncoders	8
graphs_root_path	string	The root path to a directory for storing graphs	"../graphs"
elevation_provider	string	The name of an elevation provider. Possible values are multi, cgiar or srtm	"multi"
elevation_cache_path	string	The path to a directory in which SRTM tiles will be stored	"elevation_cache"
elevation_cache_clear	boolean	keep elevation data once it has been downloaded	false
elevation_smoothing	boolean	smooth out elevation data	false
instructions	boolean	Specifies whether way names will be stored during the import or not	true
maximum_distance	number	The maximum allowed total distance of a route	100000
maximum_segment_distance_ with_dynamic_weights	number	The maximum allowed distance between two way points when dynamic weights are used	50000
maximum_waypoints	number	The maximum number of way points in a request	50
maximum_snapping_radius	number	Maximum distance around a given coordinate to find connectable edges	100
maximum_distance_round_trip_routes	number	The maximum allowed total distance of a route for the round trip algo	100000
maximum_distance_alternative_routes	number	The maximum allowed total distance of a route for the alternative route algo	100000
maximum_alternative_routes	number	The maximum number of alternative routes in a request	3
maximum_avoid_polygon_area	number	The maximum allowed total area of a polygon in square kilometers, optional	200000000
maximum_avoid_polygon_extent	number	The maximum extent (i.e. envelope side length) of a polygon in kilometers, optional	20000
location_index_resolution	number	The minimum resolution in meters of tiles in the location index. Lower values yield faster queries at a cost of increased memory requirements. Reducing the resolution reduces the lookup radius which can be compensated by increasing location_index_search_iterations. Corresponds to GraphHopper's index.high_resolution configuration parameter.	500 (default)
location_index_search_iterations	number	The maximum number of iterations performed in coordinates lookup. Higher values yield a broader search area, but might reduce query performance. It only affects the storage lookup but not its layout so changing this parameter does not require rebuilding the location index. Corresponds to GraphHopper's index.max_region_search configuration parameter.	4 (default)
maximum_speed_lower_bound	number	Specifies the threshold for the query parameter maximum_speed.	80 (default)
interpolate_bridges_and_tunnels	boolean	Interpolate elevation of bridges and tunnels.	true (default)
preparation	object	...	preparation
execution	object	...	execution

---

ors.services.routing.profiles.default_params.preparation

key	type	description	example value
min_network_size	number	Minimum size (number of edges) of an independent routing subgraph	200
methods	object		methods

ors.services.routing.profiles.default_params.preparation.methods

key	type	description	example value
ch	object	Settings for preprocessing contraction hierarchies	ch
lm	object	Settings for preprocessing landmarks	lm
core	object	Settings for preprocessing landmarks	core

ors.services.routing.profiles.default_params.preparation.methods.ch

key	type	description	example value
enabled	boolean		true
threads	number		1
weightings	string		"recommended"

ors.services.routing.profiles.default_params.preparation.methods.lm

key	type	description	example value
enabled	boolean		true
threads	number		1
weightings	string		"recommended,shortest"
landmarks	number	Total number of precomputed landmarks, the subset used during the query is set in active_landmarks	16

ors.services.routing.profiles.default_params.preparation.methods.core

key	type	description	example value
enabled	boolean		true
threads	number		1
weightings	string		"recommended,shortest"
landmarks	number	Total number of precomputed landmarks, the subset used during the query is set in active_landmarks	32
lmsets	string		"highways,tollways;highways;tollways;country_193;allow_all"

---

ors.services.routing.profiles.default_params.execution

key	type	description	example value
methods	object		methods

ors.services.routing.profiles.default_params.execution.methods

key	type	description	example value
ch	object	Settings for using contraction hierarchies in routing	ch
lm	object	Settings for using landmarks in routing	lm
core	object	Settings for using landmarks in routing	core

ors.services.routing.profiles.default_params.execution.methods.lm

key	type	description	example value
active_landmarks	number	Number of landmarks used for computing the route	8

ors.services.routing.profiles.default_params.execution.methods.core

key	type	description	example value
active_landmarks	number	Number of landmarks used for computing the route	6

---

ors.services.routing.profiles.profile-XXX

key	type	description	example value
profiles	string	name of the profile when called via the API	driving-car
parameters	object	the specific profile parameters of an profile	parameters

ors.services.routing.profiles.profile-XXX.parameters

key	type	description	example value
encoder_options	string		`"turn_costs=true\
elevation	boolean	This will enable the elevation information in the response	true
maximum_distance	number	Maximum distance a route can have in meters	100000
maximum_snapping_radius	number	Maximum distance around a given coordinate to find connectable edges	100
maximum_distance_round_trip_routes	number	The maximum allowed total distance of a route for the round trip route algo	100000
maximum_distance_alternative_routes	number	The maximum allowed total distance of a route for the alternative route algo	100000
maximum_alternative_routes	number	The maximum number of alternative routes in a request	3
maximum_avoid_polygon_area	number	The maximum allowed total area of a polygon in square kilometers, optional	200000000
maximum_avoid_polygon_extent	number	The maximum extent (i.e. envelope side length) of a polygon in kilometers, optional	20000
ext_storages	object	Controls which external storages are enabled	external storages
gtfs_file	string	Only for pt profile: location of gtfs-file used. Can either be a zip-file or the unzipped folder.	"src/test/files/vrn_gtfs_cut.zip"

ors.services.routing.profiles.profile-XXX.parameters.encoder_options

key	type	description	example value
problematic_speed_factor	number	For wheelchair profile only! Travel speeds on edges classified as problematic for wheelchair users are multiplied by this factor, use to set slow traveling speeds on such ways	problematic_speed_factor=0.7
preferred_speed_factor	number	For wheelchair profile only! Travel speeds on edges classified as preferable for wheelchair users are multiplied by this factor, use to set faster traveling speeds on such ways	preferred_speed_factor=1.2

ors.services.routing.profiles.profile-XXX.parameters.ext_storages

key	type	description	example value
WayCategory	object	Returns the way category in the route response, Compatible for any profile type	{}
WaySurfaceType	object	Returns the way surface in the route response, Compatible for any profile type	{}
HillIndex	object	Returns the ascent/descent in the route response, Compatible for any profile type	{}
TrailDifficulty	object	Returns the trail difficulty in the route response, Compatible for profile-hiking	{}
RoadAccessRestrictions	object	RoadAccessRestrictions are where roads are restricted to certain vehicles to certain circumstances, e.g. access=destination. The use_for_warnings parameter tells the ors that this storage can be used for generating warning messages in the route response. For RoadAccessRestrictions, this means that whenever a route goes over a way which has some restrictions, a warning message will be delivered with the response and the roadaccessrestrictions extra info automatically added.	{ use_for_warnings: true }
Wheelchair	object	Compatible for wheelchair	{ KerbsOnCrossings: "true" }
OsmId	object	Returns the OsmId of the way, Compatible for wheelchair	{}
Borders	object	Borders allows the restriction of routes to not cross country borders, compatible for any profile type	Borders

ors.services.routing.profiles.profile-XXX.parameters.ext_storages.Borders

key	type	description	example value
boundaries	string	The path to a file containing geojson data representing the borders of countries	'borders.geojson.tar.gz'
ids	string	Path to a csv file containing a unique id for each country, its local name and its English name	'ids.csv'
openborders	string	Path to a csv file containing pairs of countries where the borders are open (i.e. Schengen borders)	'openborders.csv'

---

ors.services.isochrones

key	type	description	example value
enabled	boolean	Enables or disables (true/false) the end-point (default: true)	true
maximum_range_distance	list	Possible values for maximum_range_distance and maximum_range_time are an integer or a list of values specifically defined for each profile	[{profiles: "any", value: 50000}, {profiles: "driving-car, driving-hgv", value: 100000}]
maximum_range_time	list		[{profiles: "any", value: 18000},{profiles: "driving-car, driving-hgv", value: 3600}]
maximum_intervals	number	Maximum number of intervals/isochrones computed for each location	10
maximum_locations	number	Maximum number of locations in one request	2
allow_compute_area	number	Specifies whether area computation is allowed	true

ors.services.isochrones.fastisochrones

key	type	description	example value
maximum_range_distance	list	Possible values for maximum_range_distance and maximum_range_time are an integer or a list of values specifically defined for each profile	[{profiles: "any", value: 50000}, {profiles: "driving-car, driving-hgv", value: 100000}]
maximum_range_time	list		[{profiles: "any", value: 18000},{profiles: "driving-car, driving-hgv", value: 3600}]

ors.services.isochrones.fastisochrones.profiles.default_params

key	type	description	example value
enabled	boolean		true
threads	number		1
weightings	string		"recommended,shortest"
maxcellnodes	number	Maximum number of nodes allowed in single isochrone cell	5000

---

ors.services.matrix

key	type	description	example value
enabled	boolean	Enables or disables (true/false) the end-point (default: true)	true
maximum_routes	number	Maximum amount of routes the matrix should compute. E.g. 2500 could be a 50x50 matrix or 1x2500 matrix	2500
maximum_routes_flexible	number	Maximum amount of routes for using custom profiles that do not support contraction hierarchies	25
maximum_search_radius	number	Maximum allowed distance between the requested coordinate and a point on the nearest road. The value is measured in meters	5000
maximum_visited_nodes	number	Maximum allowed number of visited nodes in shortest path computation. This threshold is applied only for Dijkstra algorithm	100000
allow_resolve_locations	number	Specifies whether the name of a nearest street to the location can be resolved or not. Default value is true	true
attribution	string	Attribution added to the response metadata	"openrouteservice.org, OpenStreetMap contributors"

---

ors.services.snap

key	type	description	example value
enabled	boolean	Enables or disables (true/false) the end-point (default: true)	true
attribution	string	Attribution added to the response metadata	"openrouteservice.org, OpenStreetMap contributors"

---

ors.logging

key	type	description	example value
enabled	boolean	Enables or disables the end-point (default: true)	true
level_file	string	Can be either DEBUG_LOGGING.json or PRODUCTION_LOGGING.json	"DEBUG_LOGGING.json"
location	string	Location of the logs	"/var/log/ors"
stdout	boolean		true

---

ors.system_message

Array of message objects where each has

key	type	description	example value
active	boolean	Enables or disables this message	true
text	string	The message text	"The message text"
condition	object	optional; may contain any of the conditions from the table below

condition	value	description
time_before	ISO 8601 datetime string	message sent if server local time is before given point in time
time_after	ISO 8601 datetime string	message sent if server local time is after given point in time
api_version	1 or 2	message sent if API version requested through matches value
api_format	String with output formats ("json", "geojson", "gpx"), comma separated	message sent if requested output format matches value
request_service	String with service names ("routing", "matrix", "isochrones"), comma separated	message sent if requested service matches one of the given names
request_profile	String with profile names, comma separated	message sent if requested profile matches one of the given names
request_preference	String with preference (weightings for routing, metrics for matrix, rangetype for isochrones) names, comma separated	message sent if requested preference matches one of the given names

Example:

system_message: [
    {
        active: true,
        text: "This message would be sent with every routing bike fastest request. E.g. 'The fastest weighting for cycling profiles is deprecated, use recommended weighting instead. API will be kept for compatibility until release of version 7.0.0'",
        condition: {
            "request_service": "routing",
            "request_profile": "cycling-regular,cycling-mountain,cycling-road,cycling-electric",
            "request_preference": "fastest"
        }
    },
    {
        active: true,
        text: "This message would be sent with every request for geojson response.",
        condition: {
            "api_format": "geojson"
        }
    },
    {
        active: true,
        text: "This message would be sent with every request on API v1 from January 2020 until June 2050. E.g. 'The V1 API is deprecated. You should switch to using the V2 API.'",
        condition: {
            "api_version": "1",
            "time_after": "2020-01-01T00:00:00Z",
            "time_before": "2050-06-01T00:00:00Z"
        }
    },
    {
        active: true,
        text: "This message would be sent with every request. E.g. 'Scheduled downtime due to version upgrade on March 15th 2020, 12:00 AM CET for approx. 3 hours.'"
    }
]